English 
Svenska
The BLOCKSYSTEM is a refrigerating set that consists of one condensing unit, one evaporator and one control panel. This solution enables to have a product easy tobe installed, with compact overall dimensions and reduced maintenance costs. All Blocksystems are equipped as follows:
• self-bearing housing made of galvanized sheet which is coated with epoxy powder;
• panels easy to be removed that guarantee an easy access to the components in case of inspection or maintenance;
• hermetic or semi-hermetic compressors with motor thermic protection;
• electronic control board that can be programmed according to different user requirements;
• control panel installed in a remote position;
• heat exchangers with copper and aluminium blocks;
• condensation by air (optional by water); • gas expansion by capillary tube or thermostatic valve;
• ventilation or heater automatic defrosting with programmable run duration and frequency;
• direct condensing water discharge.
• additional electronic module for master/slave operation (optional);
• additional electronic module for monitoring, recording and remote management (optional);
• remote management system (optional).
The quality of the components used, the care of the assembling process and the severe tests guarantee a product of great reliability and safety. In these machines the condensing unit, which is to be installed on the external side of the cold room walls, is separated from the evaporator, to be installed internally. This enables the two items to be installed a certain distance from each other. This solution grants an easy and fast installation both on the floor and on the roof. This range is available in two different versions: nitrogencharged with shut-off valve connections for all models or, where available, pre charge refrigerant and fast connections (ST/R). In this case it is possible to request the supply of pre-charged connection pipes (for additional details see the optional table related to each model). Ceiling mounted evaporator. Thermostatic valve or capillary expansion. Heater or ventilation defrosting. ST models are equipped with remote control panel (10m long cable).
